LuminaCast 1 Fast Set Primer I DIPON.DE
LuminaCast 1 Fast Set Primer I DIPON.DE
LuminaCast 1 Fast Set Primer I DIPON.DE
LuminaCast 1 Fast Set Primer I DIPON.DE
LuminaCast 1 Fast Set Primer I DIPON.DE
LuminaCast 1 Fast Set Primer I DIPON.DE
EpoxyPlast 100 P Diamond Clear €16.99
LuminaCast 2 Coaster Cast €16.99

LuminaCast 1 Fast Set Primer

LuminaCast 1 Fast Set Primer I High end primer for art and wood crafts

Brief Description:

Whether you're a professional craftsman or an avid DIY enthusiast, when it comes to sealing wood - especially for special projects like rivertables - you want a product that delivers efficiency, speed and perfection. With a refractive index >1.59 , the LuminaCast system is one of the clearest epoxy systems on the world market. With LuminaCast 1 Fast Set Primer, that's exactly what you get.

Key features:

  • Optimum primer: Specially developed for sealing wood and other absorbent substrates, it effectively reduces or eliminates the risk of rising bubbles.
  • Fast effectiveness: Thanks to its low viscosity, it penetrates deep into fibers and absorbent surfaces, providing a quick and effective seal.
  • Highly transparent: Get a clear, flawless finish that enhances the natural beauty of wood or other materials.
  • Self-deaerating: Equipped with an excellent self-deaerating ability - supported by a bio-based deaerator with an impressive percentage of over 70%.
  • UV-stabilized: The unmatched UV stabilization in the epoxy ensures that your projects will not yellow and will retain their flawless appearance even in strong sunlight.
  • Fast curing: At room temperature, the primer can be poured over after just 60-120 minutes.
  • Part of an innovative system: LuminaCast 1 Fast Set Primer is a key component of the LuminaCast epoxy resin system, the world's most advanced epoxy resin system consisting of one resin and ten hardeners. This system offers state-of-the-art ingredients for outstanding properties.
  • 100% DIPON: Developed, tested and produced by DIPON in its own factory. Full quality and production control for the best performance for you.

Unique selling points:

  • Sustainable ingredients: Equipped with a bio-based deaerator, over 70% of which comes from renewable sources.
  • Excellent longevity: The particularly low-yellowing hardener formula and the unrivalled UV stabilization in the epoxy resin ensure that your artwork is free of yellowing for an above-average period of time.
  • In-house production: Like all other EP systems, LuminaCast is developed entirely by DIPON. No external work, no external filling, 100% in-house production. We are a genuine formulating and manufacturing company.

Do not compromise on your wood and art projects. Choose LuminaCast 1 Fast Set Primer for a flawless, durable and fast seal. Discover the most advanced epoxy resin system in the world and take your projects to a whole new level!

Further information:

Bootstrap Scope of delivery: LuminaCast 1 Fast Set Primer [A + B] in a set
×

LuminaCast 1 Fast Set Primer


LuminaCast Epoxidharz System

 
Dyn. Viskosität Harz A (23°C): 700 ± 50 mPa*s
Dyn. Viskosität Härter B (23°C): 120 ± 50 mPa*s
Mischungsverhältnis: 2:1 (Harz A + Härter B) nach Gewicht
Verarbeitungszeit (23°C, 200 Gramm, 10mm):* ca. 15 min. (23°C - 40°C)
tTMax (23°C, 200 Gramm, 20mm)**: ca. 30 min.
Empfohlene Materialtemperatur A+B: mind. 20°C, empfohlen 23°C
Empfohlene Umgebungstemperatur: mind. 10°C, empfohlen 15-25°C
Empfohlene Gießhöhe (20°C): 0,1 cm - 0,7 cm (1 - 7 mm)
Entformbar nach (23°C)***: ca. 2 - 4 Stunden (5-7 mm)
Nächste Schicht gießbar: ca. 1 - 2 Std. (20°C) (7 mm)
Empf. Mindestmischmenge A+B****: keine
Schleifbar nach*****: ca. 1,5-2 Tage, 5-7 mm, 23°C RT
Härte nach 7 Tagen (23°C): Shore D72
Wärmeformbeständigkeit: ca. 68°C
 

Wichtige Informationen:

Allgemein werden zur Berechnung der Topfzeit standardisierte Werte genutzt. Bei schnellen Systemen wird in der Regel ein Ansatz von 200 Gramm in einem bestimmten Durchmesser und Umgebung in einem HDPE-Becher in adiabater Umgebung gemessen. Die Verarbeitungszeiten verändern sich bei Erhöhung oder Verminderung des Materialfüllstandes sowie der Umgebungs- und Materialtemperatur.

 * Die Verarbeitungszeit oder Topfzeit wird als der Zeitraum bezeichnet, wo das vermischte Medium eine Temperatur von 40°C erreicht. Ausgangswerte sind stets 23°C, welche die Laborbedingungen und Messungen in Mitteleuropa widerspiegeln. In Südeuropa und wärmeren Region wird in der Regel ein Wert von 25°C bei Viskosität und Topfzeit (Engl.: "Pot Life" wiedergegeben.

** Die tTMax bezeichnet die Zeitspanne zur Erreichung der maximalen Exotherme (Energiefreisetzung). Die Energie welche bei 2K EP-Systemen freigegeben wird ist deutlich vereinfacht ausgedrückt Wärme. Die Zeitspanne ist in der Regel das doppelte der Verarbeitungszeit.

*** Die Entformbarkeit bei 23 Grad Umgebungstemperatur bei der in Klammern angegeben Gießhöhe. Bei einer geringeren Gießhöhe und gleichbleibender Temperatur verlängert sich die Aushärtungszeit. Bei Zugabe von Färbemitteln kann sich die Verarbeitungszeit verlängern.

**** Die Empfohlene Mindestmischmenge um ein "Ankurbeln" der Reaktion zu erzeugen. Geringere Mischmengen können eine inhomogene Masse zur Folge haben sowie Carbamatbildung begünstigen aufgrund der offenen Standzeit und geringen Wärmeabgabe bei u.a. IPD haltigen Härtern.

***** Der Zeitpunkt ab wann ein Epoxidharz geschliffen werden kann ist abhängig vom Härtegrad. Bei einer zu weichen Oberfläche, in der Regel nach einer zu kurzen Aushärtungszeit, besteht die Gefahr das beim Schleifen durch die eintretende Wärmeentwicklung die Oberfläche nicht gleichmäßig geschliffen wird. Das Risiko einer Beschädigung ist sehr groß, da durchaus die Oberfläche noch Gummiartig resp. klebrig sein kann. Bei Professionellen Anwendern ist ein Shore D Härtemessgerät sehr hilfreich, da hierdurch die Härte gemessen werden kann. Die angegebenen Daten beziehen sich auf eine Gusshöhe (angegeben in mm) sowie die konstante Raumtemperatur (angegeben als Abkürzung RT). 

Anwendungsgebiete

Grundierung und Versiegelung von saugfähigen/porösen Untergründen, z.B. Hölzer im Holzhandwerk.

Als sehr schnelle Grundierung bei Verguss von Epoxidharz Tischen.

Resin Art & Fixativ: Ideal für die schnelle Beschichtung von Canvas-Bildern und als Fixativ für die unterste Schicht.

Lebensmittelkontakt: Die Formulierung ist frei von sVHC oder CoRAP Substanzen. Nach vollständiger chemischer Aushärtung kann das Produkt mit Lebensmitteln in Kontakt kommen.
 

Allgemeine Charakteristik

Besonders vielseitig anwendbar
Besonders schnelle Aushärtung
Kristallisationsstabile Formulierung
Enthält UV-Absorber und n-Hals Lichtstabilisatoren
Enthält Vergilbungsarme Amine im Härter
Hochtransparente Glasartige Aushärtung
Modernste Entlüfter für Selbstentlüftung
Lebensmittelkontakt: Die Formulierung ist frei von sVHC oder CoRAP Substanzen. Nach vollständiger chemischer Aushärtung kann das Produkt mit Lebensmitteln in Kontakt kommen
 

LuminaCast System Überblick


 

Quick Info LuminaCast Epoxy System

PRODUKT Farbe A+B Viskosität (23°C) mPa*s ± 50 Max. Gießhöhe (mm) (20°C)

MV*

A+B

(nach Gewicht)

 Anwendungsbereiche UV-Stabilisierung
LuminaCast 1 Fast Set Primer Glasklar

Niedrig

120

1-7

 2:1 Vorbereitung der Holzgrundierung beim Tischbau (u.a. River Tische), Grundierung für saugfähige und poröse Untergründe

Hervorragend

***
LuminaCast 2 Coaster Cast Glasklar

Niedrig

290

1-15

 2:1 Dekorative hochtransparente Einbettungen und Formen, Resin Art

Hervorragend

***

 
LuminaCast 3 Crystal Flow Glasklar

Niedrig

140

1-10

 2:1 Dekorative hochtransparente Einbettungen & Formen, Varnish für Canvas, Leinwände

Hervorragend

***
LuminaCast 4 Gem Flow Glasklar

Niedrig

890

1-20

 2:1 Resin Art, Tablets, Coaster, Tischbeschichtungen, Petri-Art

Hervorragend

***
LuminaCast 5 Radiant Flow Glasklar

Mittel

1330

1-20

 2:1 Ähnlich zu LuminaCast 4, 1,5 höhere Viskosität, langsamere Fließeigenschaften für Resin-Art

Hervorragend

***
LuminaCast 6 Art Flow Glasklar

Hoch

4100

1-20

 2:1 Maltechniken, Resin Art, Arbeitsplatten, Versiegelungen

Hervorragend

***
LuminaCast 7 Design Flow Glasklar

Hoch

5500

1-20

 2:1 Ähnlich zu LuminaCast 6, langsamere Fließeigenschaften

Hervorragend

***
LuminaCast 8 Table Flow Glasklar

Niedrig

75±25

20-50

2:1

/

100:40

**

 Für große Dickschichtvergüsse, z.B. für River Tables, Lampenherstellung, größere Castings in einem Guss

Hervorragend

***
LuminaCast 9 Ocean Flow Glasklar

Niedrig

55±25

30-100

 2:1 Für sehr große Dickschichtvergüsse, z.B. für River Tables, Lampenherstellung

Hervorragend

***
LuminaCast 10 Cell Flow Glasklar

Mittel

2500

1-20

 2:1 Ähnlich zu LuminaCast 5, jedoch ca. 2x höhere Viskosität. Ideal für Ocean Technik, Zellenherstellung, Petri-Art, Resin-Kunst

Hervorragend

***

Legende

 
*

Mischungsverhältnis
** 2:1 (weicher) / 100 : 40 Härter
*** (UVA + n-Hals in A), Vergilbungsarme Amine in B
 
 
 

Haben Sie Fragen?

 
Hilfezentrum Support Ticket erstellen
 
 
 
 
×

LuminaCast Epoxy System Datenblätter


LuminaCast Epoxidharz System

 

Datenblätter

PRODUKT

TDB

SDB
LuminaCast Komponente A

pdf_icon.png

pdf_icon.png
LuminaCast 1 Fast Set Primer

pdf_icon.png

pdf_icon.png
LuminaCast 2 Coaster Cast

pdf_icon.png

pdf_icon.png
LuminaCast 3 Crystal Flow

pdf_icon.png

pdf_icon.png
LuminaCast 4 Gem Flow

pdf_icon.png

pdf_icon.png
LuminaCast 5 Radiant Flow

pdf_icon.png

pdf_icon.png
LuminaCast 6 Art Flow

pdf_icon.png

pdf_icon.png
LuminaCast 7 Design Flow

pdf_icon.png

pdf_icon.png
LuminaCast 8 Table Flow

pdf_icon.png

pdf_icon.png
LuminaCast 9 Ocean Flow

pdf_icon.png

pdf_icon.png
LuminaCast 10 Cell Flow

pdf_icon.png

pdf_icon.png

Legende

 
TDB

Technisches Datenblatt
SDB Sicherheitsdatenblatt
 
 

Haben Sie Fragen?

 
Hilfezentrum Support Ticket erstellen
1. Quantity

Produktkonfigurator

+ Optionales Zubehör

LUC1FAPR-0075
€17.99

€23.99 Kilogramm

Tax included

DIPON Payments

Kennzeichnung gemäß CLP/GHS-Verordnung

LuminaCast A LuminaCast 1 Fast Set Primer (B)
GHS 07 GHS 09
   
  GHS 05 GHS 07  

 

 

Sicherheitshinweise LuminaCast 1 Fast Set Primer (A + B)

Lumina Cast Komponente A

 
GHS 05 GHS 07  
 

Achtung: Enthält 4,4'-Methylen diphenyldiglycidylether Reaktionsmasse von 2,2' -[Methylenbis(p-phenylenoxymethylen)]bisoxiran und 2,2' -[Methylenbis(ophenylenoxymethylen)] bisoxiran und [[2-[p-(oxiranylmethoxy)benzyl]phenoxy]methyl]oxiran Fettsäuren, C16-18 und C18 ungesättigt, Methylester, epoxidiert Reaction mass of methyl 1,2,2,6,6-pentamethyl-4-piperidyl sebacate and bis(1,2,2,6,6-pentamethyl-4-piperidyl) sebacate.

Gefahrenhinweise
H315 Verursacht Hautreizungen.
H319 Verursacht schwere Augenreizung.
H317 Kann allergische Hautreaktionen verursachen.
H411 Giftig für Wasserorganismen, mit langfristiger Wirkung.

Sicherheitshinweise
P101 Ist ärztlicher Rat erforderlich, Verpackung oder Kennzeichnungsetikett bereithalten.
P102 Darf nicht in die Hände von Kindern gelangen.
P103 Lesen Sie sämtliche Anweisungen aufmerksam und befolgen Sie diese.
P261 Einatmen von Staub/Rauch/Gas/Nebel/Dampf/Aerosol vermeiden.
P273 Freisetzung in die Umwelt vermeiden.
P280 Schutzhandschuhe / Augenschutz / Gesichtsschutz tragen.
P305+P351+P338 BEI KONTAKT MIT DEN AUGEN: Einige Minuten lang behutsam mit Wasser ausspülen. Eventuell
vorhandene Kontaktlinsen nach Möglichkeit entfernen. Weiter ausspülen.
P333+P313 Bei Hautreizung oder -ausschlag: Ärztlichen Rat einholen/ärztliche Hilfe hinzuziehen.
P501 Entsorgung des Inhalts / des Behälters gemäß den örtlichen / regionalen / nationalen/ internationalen Vorschriften.

Lumina Cast 1 Fast Set Primer Komponente B

 
GHS 05 GHS 07  

 

Gefahr: Enthält Phenylcarbinol, 1,3-Bis(aminomethyl)cyclohexan 

Gefahrenhinweise
H302+H312 Gesundheitsschädlich bei Verschlucken oder Hautkontakt.
H314 Verursacht schwere Verätzungen der Haut und schwere Augenschäden.
H412 Schädlich für Wasserorganismen, mit langfristiger Wirkung.

Sicherheitshinweise
P101 Ist ärztlicher Rat erforderlich, Verpackung oder Kennzeichnungsetikett bereithalten.
P102 Darf nicht in die Hände von Kindern gelangen.
P103 Lesen Sie sämtliche Anweisungen aufmerksam und befolgen Sie diese.
P303+P361+P353 BEI BERÜHRUNG MIT DER HAUT (oder dem Haar): Alle kontaminierten Kleidungsstücke sofort
ausziehen. Haut mit Wasser abwaschen [oder duschen].
P305+P351+P338 BEI KONTAKT MIT DEN AUGEN: Einige Minuten lang behutsam mit Wasser spülen. Eventuell
vorhandene Kontaktlinsen nach Möglichkeit entfernen. Weiter spülen.
P310 Sofort GIFTINFORMATIONSZENTRUM/Arzt anrufen.
P321 Besondere Behandlung (siehe auf diesem Kennzeichnungsetikett).
P362+P364 Kontaminierte Kleidung ausziehen und vor erneutem Tragen waschen.
P405 Unter Verschluss aufbewahren.
P501 Entsorgung des Inhalts / des Behälters gemäß den örtlichen / regionalen / nationalen / internationalen Vorschriften.

Mengenrabatte

Contact support team

Mengenrabatt

Kaufen Sie mehrere Einheiten um Rabatte zu erhalten.
Quantity Discount Unit price Total price Buy
1 - €17.99 €17.99  
4 3.45% €17.37 €69.48  
5 3.65% €17.33 €86.67  
6 3.85% €17.30 €103.78  
7 3.9% €17.29 €121.02  
8 4% €17.27 €138.16  
9 4.2% €17.23 €155.11  
 

LuminaCast 1 Fast Set Primer:

General characteristics
  • Fast curing
  • Crystallization-stable formulation
  • Contains UV absorbers and n-neck light stabilizers
  • Slightly elastic and crack-bridging
  • Ideal for mechanically working workpieces
  • Particularly high carbamate resistance
  • Highly transparent glass-like curing
  • Excellent self-venting properties
  • Bio-based ingredients in the epoxy resin
  • Free of CoRAP and sVHC substances
  • State-of-the-art, particularly low-yellowing base amines and additives
  • 0% VOC content (EU value)
  • Excellent wetting ability of the substrate
  • Very low shrinkage (<0.1%)
  • Compatible with z.B. wood, concrete, glass, metal, glass and carbon fiber mesh, natural stone, quartz sand, marble, granite
  • Can be used with all DIPON® Alcohol paints, resin pastes & effect pigments
Technical data
  • Mixing ratio 2:1 (A+B) by weight
  • Processing time (23°C), 200 grams: approx. 15 min. (23°C- > 40°C)
  • Recommended material temperature (A+B): 20°- 24°C
  • Recommended ambient temperature: 20°C - 25°C
  • Dyn. viscosity (mPa*s) 23°C: A 730 ± 50
  • Dyn. viscosity (mPa*s) 23°C: B 120 ± 50
  • Layer thickness (20°C): 1 - 7 mm
  • Hardness after 7 days (23°C): Shore D68
  • Heat deflection temperature: approx. 68°C
Fields of application
  • Priming and sealing of absorbent/porous substrates, z.B. wood in the woodworking trade.
  • Tables: Ideal for pre-treatment with River-Table
  • Resin Art: Ideal for the quick coating of canvas paintings
  • Production of multi-layered potting with LC1 Fast Set Primer as a fixative for the base.
  • Food contact: The formulation is free from sVHC or CoRAP substances. After complete chemical curing, the product can come into contact with food.

Application

LuminaCast 1 Fast Set Primer is accurately weighed by weight in a clean container at a mixing ratio of 2:1. A scale and two mixing cups are required to enable exact weighing and mixing. Never mix by volume, as this can lead to an incorrect result. First mix the A and B components at max. 300 revolutions/minute for approx. three to four minutes. Then pour the A+B mixture into a new clean container and mix again for three to four minutes. Scrape off some of the resin from the edges of the old container and drop it into the center of the new one. This process is important to obtain a mixture that is as homogeneous as possible.

Important notes: Mixing the transport containers (bottles / canisters) A (resin) and B (hardener) will result in incomplete curing and correspondingly incorrect results. The higher the room temperature and the larger the quantity mixed, the faster the temperature development (exothermic reaction).

Important application data:

  • Working time (pot life) at 23°C (200 grams, 5 mm): approx. 15 min.
  • tTmax (23°C, 200 grams, 5 mm) (time to maximum exotherm): approx. 50 min.
  • Mixing time: 3-4 min. + repotting and again 3-4 min. for a mixture that is as homogeneous as possible
  • Mixing ratio: 2:1 by weight (A+B)
  • Recommended casting height: (20°C): 0.1 cm - 0.7 cm (1 - 7 mm)
  • Demoldable after (23°C): approx. 2 - 4 hours (5-7 mm)
  • Next layer can be poured after: approx. 1-2 hours at 20°C
  • Minimum mixing quantity: no limit

What is LuminaCast?

LuminaCast was developed to create an unrivalled clear, UV-stabilized and self-deaerating system that is easy to handle and covers as many areas of application as possible, especially in the artistic field. In all formulations, special attention was paid to achieving the highest possible carbamide resistance by using state-of-the-art raw materials and adding hydrophobic additives. Furthermore, in addition to the latest UV absorbers and light stabilizers, only low-yellowing base amines in the hardener and particularly UV-resistant additives have been added to this system. LuminaCast is designed for every application in the decorative sector, whether priming, trays, furniture or large-volume casting. With one resin and ten hardeners, you have maximum flexibility and can give free rein to your creative streak!

The LuminaCast system at a glance:

  • LuminaCast A component - epoxy resin for all LuminaCast hardeners - (730 mPa*s ± 50, 23°C)
  • LuminaCast 1 Fast Set Primer (1 mm to 7 mm) - (120 mPa*s ± 50) Low viscosity, pot life, approx. 15 min., can be poured over after 60 - 120 min., ideal as primer / sealer for porous substrates such as z.B. wood
  • LuminaCast 2 Coaster Cast (1 mm to 15 mm) - (290 mPa*s ± 50) Low viscosity, pot life approx. 40 min. ideal for decorative, highly transparent embeddings and molds
  • LuminaCast 3 Crystal Flow (1 mm to 10 mm) - (140 mPa*s ± 50) Particularly low viscosity, pot life approx. 35 min. ideal for decorative, highly transparent investments and molds
  • LuminaCast 4 Gem Flow Flow (1 mm to 20 mm) - (890 mPa*s ± 50) Low viscosity, pot life approx. 55 min. u.a. for resin art with a higher viscosity, comparable to the B20 JewelCast only more viscous
  • LuminaCast 5 Radiant Flow (1 mm to 20 mm) - (1330 mPa*s ± 50) Medium viscosity, pot life approx. 60 min. u.a. like LuminaCast 4 GemFlow, slightly slower and slower flow properties due to higher viscosity
  • LuminaCast 6 Art Flow (1 mm to 20 mm) - (4100 mPa*s ± 50) High viscosity, pot life approx. 45 min. for painting techniques, resin art, worktops, sealers, similar to HoneyResin.
  • LuminaCast 7 Design Flow (1 mm to 20 mm) - (5500 mPa*s ± 50) High viscosity, pot life approx. 50 min. Special flow properties due to setting agent, similar to LuminaCast 6 ArtFlow, feels thinner.
  • LuminaCast 8 Table Flow (20 mm to 50 mm) - (75 mPa*s ± 50) Low viscosity, pot life approx. 180 min. for large thick-film castings z.B. for river tables, lamp production, larger castings in one pour
  • LuminaCast 9 Ocean Flow (30 mm to 100 mm) - (55 mPa*s ± 50) Low viscosity, pot life approx. 240 min. for very large thick-film castings z.B. for river tables, lamp production
  • LuminaCast 10 Cell Flow (1 mm to 20 mm) - (2500 mPa*s ± 50) Medium viscosity, pot life approx. 50 min. for cell effects, Petri Art, floral patterns, resin art, table tops, sealants u.v.m.
Potting height
up to 0.7 cm (7 mm)
Application
Priming & laminating
Properties
Self-venting, UV-stabilized (UVA + n-HALS), Diamond clear
Viscosity
Low viscosity (1-999 mPa-s)
Calculator
Yes
Info
Yes
Epoxy resin type
Aromatic
Mixing ratio (A+B)
100 : 50 (A + B)
Epoxy system
LuminaCast
Coating type
Solvent-free
Container
HDPE canister / bottle
4063636042574

Laden Sie Ihre Fotos hoch

Jetzt Neu und nicht verpassen! Laden Sie Ihre Fotos hoch und erhalten bei Genehmigung eine Belohnung in Form eines Gutscheins. Ihre Fotos werden für das jeweilige Produkt auf der Produktseite angezeigt.

only logged users can upload product photos click here to login

No pictures uploaded

Videos

only logged users can upload videos click here to login

No videos uploaded

You might also like

LuminaCast 1 Fast Set Primer I DIPON.DE LuminaCast 1 Fast Set Primer I DIPON.DE 2
Accessories

Pouring spout DIN45 with bellows seal

EPZH-BLGDIN45
  • Für HDPE-Flaschen bis 1 kg
  • Black tones
  • Simple dosing for canisters from 1.5 kg
  • DIN 45 spout
€0.99
Pouring spout DIN45 with bellows seal HDPE pouring aid for DIN 45 UN chemical canisters which are used at DIPON as canisters in sizes from 2 kilograms and upwards. The pouring aid is a solution for clean and easy dosing of low, medium and high viscosity media. The extendable plastic bellows facilitate precise dosing without soiling the side walls or...
Produktdetails
LuminaCast 1 Fast Set Primer I DIPON.DE LuminaCast 1 Fast Set Primer I DIPON.DE 2
Release agent

Mold release tape for epoxy resins

EPXTRBDT
  • Release agent
  • White tones
  • Excellent separating effect
  • For DIY & resin art, For industry & trade
  • 66 m x 5.5 cm (3.63m²)
€7.99
DIPON® mold release tape I Excellent release effect DIPON® Epoxy Release Duct Tape is a mold release tape for epoxy resins. This tape has an excellent release effect and, with the optionally available EpoxRelease release agent spray, is the ideal solution for easily removing potting from an existing formwork. Properties: Tape thickness: approx....
Produktdetails
LuminaCast 1 Fast Set Primer I DIPON.DE LuminaCast 1 Fast Set Primer I DIPON.DE 2
Epoxy resin and hardener single components

LuminaCast 1 Fast Set Primer (B)

LUC1KPBB
  • up to 0.7 cm (7 mm)
  • Diamond clear
  • Low viscosity (1-999 mPa-s)
  • Yes
  • Liquid
  • Yes
  • Aromatic
  • Yes
  • 100 : 50 (A + B)
  • LuminaCast
  • For industry & trade, For DIY & resin art
  • HDPE canister / bottle
€6.99
LuminaCast 1 Fast Set Primer I High end primer for art and wood crafts Brief Description: Whether you're a professional craftsman or an avid DIY enthusiast, when it comes to sealing wood - especially for special projects like rivertables - you want a product that delivers efficiency, speed and perfection. With a refractive index >1.59 , the LuminaCast...
Produktdetails

Customers who bought this product also bought:

LuminaCast 1 Fast Set Primer I DIPON.DE
Metallic foils

Metallic gold leaf Chrome Violet Leaf

EFPI0720
  • Shades of green
  • Yes
  • Flakes
  • No microplastics
  • Organic
  • Metal effect
  • Yes
  • Cat 1 pigment
€5.49
Product description: Add a mesmerizing metallic shimmer to your creations with our metallic gold leaf sheets! These precious sheets add a luxurious sheen to any project and combine effortlessly with polymer clay or epoxy resin. Mix them into the clay or resin, or roll the foil pieces onto the rolled out polymer clay or poured epoxy resin to create a...
Produktdetails
LuminaCast 1 Fast Set Primer I DIPON.DE LuminaCast 1 Fast Set Primer I DIPON.DE 2
Ghost Pearls

Pure Copper Ghost Pearl Pigment

EFPI0043
  • Orange tones
  • 10 - 60 µm
  • Yes
  • Powder
  • No microplastics
  • Mica
  • Inorganic
  • Interference
  • Cat 1 pigment
€1.99
DIPON® effect pigments I High-quality brilliance for a wide range of applications DIPON® effect pigments are world-renowned powder pigments which stand for a first-class selection and have been produced and selected for various areas of application. These include powder coating, painting of automobiles and commercial vehicles, nail design, soap...
Produktdetails
LuminaCast 1 Fast Set Primer I DIPON.DE LuminaCast 1 Fast Set Primer I DIPON.DE 2
Solid Pearls

Champagne Pearl Pigment

EFPI0431
  • Gold tones
  • 10 - 60 µm
  • Yes
  • Powder
  • No microplastics
  • Mica
  • Inorganic
  • Pearlescence
  • ≤ 300°C
  • Yes
  • Cat 1 pigment
€1.99
DIPON® Solid Pearls I Intense pearlescent effects for powerful accents. Brief description: DIPON® Solid Pearls are highly opaque pearlescent pigments that create intense colors and powerful accents. These pigments are based on fine mica layers coated with metal oxides such as titanium dioxide or iron oxide, giving them a brilliant, iridescent sheen -...
Produktdetails
LuminaCast 1 Fast Set Primer I DIPON.DE
Epoxy RAL Classic Pigment Paste

Pearl white [ca. RAL 1013] Epoxy Resin Pigment Paste

EPRP1013
  • Yellow tones
  • Yes
  • Liquid
  • No microplastics
  • Yes
  • HDPE can
€5.99
DIPON® Epoxy Pigment Paste - RAL K7 Classic I Highly concentrated color pastes for precise coloring. Brief description: DIPON® Epoxy Pigment Paste is a highly concentrated color paste specially developed for use with epoxy resins. These pigments make it possible to achieve intense colors in over 190 different shades according to the RAL K7 Classic...
Produktdetails
LuminaCast 1 Fast Set Primer I DIPON.DE LuminaCast 1 Fast Set Primer I DIPON.DE 2
Out-of-Stock
Solid Pearls

Spring Green Pearl Pigment

EFPI0019
  • Shades of green
  • Yes
  • >100 µm
  • No microplastics
  • Mica
  • Inorganic
  • Pearlescence
  • Yes
€1.99
DIPON® Solid Pearls I Intense pearlescent effects for powerful accents. Brief description: DIPON® Solid Pearls are highly opaque pearlescent pigments that create intense colors and powerful accents. These pigments are based on fine mica layers coated with metal oxides such as titanium dioxide or iron oxide, giving them a brilliant, iridescent sheen -...
Produktdetails

15 other products in the same category:

LuminaCast 1 Fast Set Primer I DIPON.DE LuminaCast 1 Fast Set Primer I DIPON.DE 2
Epoxy resin colorless

LuminaCast 2 Coaster Cast

LUC02COCA
  • up to 2 cm (20 mm)
  • Jewelry, pendants, trays
  • Self-venting, UV-stabilized (UVA + n-HALS), Diamond clear
  • Low viscosity (1-999 mPa-s)
  • Yes
  • Aromatic
  • 100 : 50 (A + B)
  • LuminaCast
  • Solvent-free
  • HDPE canister / bottle
€16.99
LuminaCast 2 Coaster Cast | Perfection for precise casting and artwork Brief description: LuminaCast 2 Coaster Cast offers crystal clear transparency and outstanding flow properties. It has been specially developed for fine, detailed casting such as resin art, jewelry making, embedding and surface sealing. With a refractive index >1.59, it is one of...
Produktdetails
LuminaCast 1 Fast Set Primer I DIPON.DE LuminaCast 1 Fast Set Primer I DIPON.DE 2
Epoxy resin colorless

EpoxyPlast 3D B50 Deep Pour

EPH3DB50
  • up to 5 cm (50 mm)
  • Tables & lamps
  • Self-venting, UV-stabilized (UVA + n-HALS), Diamond clear
  • Low viscosity (1-999 mPa-s)
  • Yes
  • Yes
  • Aromatic
  • 100 : 40 (A + B)
  • EpoxyPlast 3D
  • Solvent-free
  • HDPE canister / bottle
€17.99
EpoxyPlast 3D B50 Deep Pour I Highest transparency for potting up to 5 cm thick. Product description: Meet EpoxyPlast 3D B50 Deep Pour - an epoxy resin specifically designed for projects that require an exceptionally clear and deep pour. Its low viscosity nature makes it the perfect choice for applications such as river tables and other...
Produktdetails
LuminaCast 1 Fast Set Primer I DIPON.DE LuminaCast 1 Fast Set Primer I DIPON.DE 2
Epoxy resin colorless

LuminaCast 9 Ocean Flow

LUC09OCEA
  • up to 10 cm (100 mm)
  • Tables & lamps
  • Self-venting, UV-stabilized (UVA + n-HALS), Diamond clear
  • Low viscosity (1-999 mPa-s)
  • Yes
  • Aromatic
  • 100 : 50 (A + B)
  • LuminaCast
  • Solvent-free
  • HDPE canister / bottle
€17.99
LuminaCast 9 Ocean Flow I Ultra Transparent for high potting up to 10 cm. Brief description: LuminaCast 9 Ocean Cast not only represents the highest quality, but is also a central component of the LuminaCast epoxy resin system. While it works in a similar way to LuminaCast 8 Table Cast, LuminaCast 9 Ocean Cast is characterized by a longer working time...
Produktdetails
LuminaCast 1 Fast Set Primer I DIPON.DE LuminaCast 1 Fast Set Primer I DIPON.DE 2
Epoxy resin colorless

LuminaCast 5 Radiant Flow

LUC05RAFL
  • up to 2 cm (20 mm)
  • Jewelry, pendants, trays
  • Self-venting, UV-stabilized (UVA + n-HALS), Diamond clear
  • Medium viscosity (1000 - 2999 mPa-s)
  • Yes
  • Aromatic
  • 100 : 50 (A + B)
  • LuminaCast
  • Solvent-free
  • HDPE canister / bottle
€16.99
LuminaCast 5 Radiant Flow | Ideal for clear, luminous art projects Brief description: LuminaCast 5 Radiant Flow is the ideal choice for luminous art projects. With a refractive index >1.59, it is one of the clearest epoxy systems on the market and ensures radiant results. The self-deaerating formula minimizes bubble formation and produces smooth,...
Produktdetails
LuminaCast 1 Fast Set Primer I DIPON.DE LuminaCast 1 Fast Set Primer I DIPON.DE 2
Epoxy resin colorless

LuminaCast 4 Gem Flow

LUC04GEMF
  • up to 2 cm (20 mm)
  • Jewelry, pendants, trays
  • Self-venting, UV-stabilized (UVA + n-HALS), Diamond clear
  • Low viscosity (1-999 mPa-s)
  • Yes
  • Aromatic
  • 100 : 50 (A + B)
  • LuminaCast
  • Solvent-free
  • HDPE canister / bottle
€16.99
LuminaCast 4 Gem Flow I Highly transparent solution for clear art projects Brief description: LuminaCast 4 Gem Flow is a specialized epoxy resin for creative projects that offers crystal clear transparency and excellent UV stability. It is ideal for applications such as jewelry making, resin work and other projects where a brilliant look is required....
Produktdetails
LuminaCast 1 Fast Set Primer I DIPON.DE LuminaCast 1 Fast Set Primer I DIPON.DE 2
Epoxy resin colorless

LuminaCast 6 Art Flow

LUC06ARTF
  • up to 2 cm (20 mm)
  • Jewelry, pendants, trays
  • Self-venting, UV-stabilized (UVA + n-HALS), Diamond clear
  • High viscosity (over 2999 mPa-s)
  • Yes
  • Aromatic
  • 100 : 50 (A + B)
  • LuminaCast
  • Solvent-free
  • HDPE canister / bottle
€16.99
LuminaCast 6 Art Flow I Excellent Geode & Resin Art Brief description: Let your creativity run wild with the high viscosity LuminaCast 6 Art Flow, the top class system specially formulated for resin artists. Developed for the most demanding resin art projects, this product combines not only excellent flow properties but also a flawless finish. Rely on...
Produktdetails
LuminaCast 1 Fast Set Primer I DIPON.DE LuminaCast 1 Fast Set Primer I DIPON.DE 2
Product available with different options
Epoxy resin colorless

DCS Resin - Flexible Doming Canvas & Sealing Epoxy

EPFDCSR
  • up to 0.7 cm (7 mm)
  • Doming
  • Hydrophobic (insoluble in water), Elastic, Diamond clear, Self-venting, UV-stabilized (UVA + n-HALS)
  • Medium viscosity (1000 - 2999 mPa-s)
  • Yes
  • Yes
  • Aromatic
  • 100 : 70 (A + B)
  • DCS Resin
  • Solvent-free
  • HDPE canister / bottle
€29.99
DCS Resin - Flexible Doming Canvas & Sealing Epoxy | Flexible, highly transparent epoxy resin for artistic and decorative coatings Brief description: DCS Resin - Flexible Doming Canvas & Sealing Epoxy is a highly transparent, flexible epoxy resin specially developed for the doming process. It offers excellent surface tension that...
Produktdetails
LuminaCast 1 Fast Set Primer I DIPON.DE LuminaCast 1 Fast Set Primer I DIPON.DE 2
Epoxy resin colorless

LuminaCast 3 Crystal Flow

LUC03CRFL
  • up to 1 cm (10 mm)
  • Jewelry, pendants, trays
  • Self-venting, UV-stabilized (UVA + n-HALS), Diamond clear
  • Low viscosity (1-999 mPa-s)
  • Yes
  • Aromatic
  • 100 : 50 (A + B)
  • LuminaCast
  • Solvent-free
  • HDPE canister / bottle
€16.99
LuminaCast 3 Crystal Flow I Perfection for decorative applications Brief description: Experience the exceptional clarity and stability of LuminaCast 3 Crystal Flow, a low viscosity epoxy resin that is perfect for decorative applications, embedding and molding. Thanks to its special formulation, outstanding transparency and UV stability are achieved,...
Produktdetails
LuminaCast 1 Fast Set Primer I DIPON.DE LuminaCast 1 Fast Set Primer I DIPON.DE 2
Epoxy resin colorless

LuminaCast 7 Design Flow

LUC07DESI
  • up to 2 cm (20 mm)
  • Jewelry, pendants, trays
  • Self-venting, UV-stabilized (UVA + n-HALS), Diamond clear
  • High viscosity (over 2999 mPa-s)
  • Yes
  • Aromatic
  • 100 : 50 (A + B)
  • LuminaCast
  • Solvent-free
  • HDPE canister / bottle
€16.99
LuminaCast 7 Design Flow I For masterful works of art. Brief description: Prepare for a whole new dimension in resin art. LuminaCast 7 Design Flow has been specially developed to meet the demanding needs of professional artists and designers. Its high viscosity formulation allows for precise applications covering both details and larger areas, turning...
Produktdetails
LuminaCast 1 Fast Set Primer I DIPON.DE LuminaCast 1 Fast Set Primer I DIPON.DE 2
Epoxy resin colorless

EpoxyPlast 100 P Diamond Clear

EPPT100P
  • up to 1 cm (10 mm)
  • Jewelry, pendants, trays
  • Self-venting, UV-stabilized (UVA + n-HALS), Diamond clear
  • Low viscosity (1-999 mPa-s)
  • Yes
  • Yes
  • Aromatic
  • 100 : 50 (A + B)
  • 100P Diamond Clear
  • Solvent-free
  • HDPE canister / bottle
€16.99
EpoxyPlast 100 P Diamond Clear | Highest transparency for arts and crafts Brief description: EpoxyPlast 100 P Diamond Clear offers crystal clear transparency and is ideal for creative projects such as resin art, jewelry making, embedding and surface sealing. Thanks to the self-deaerating formula, bubble-free, smooth surfaces are achieved. The...
Produktdetails
LuminaCast 1 Fast Set Primer I DIPON.DE LuminaCast 1 Fast Set Primer I DIPON.DE 2
Epoxy resin colorless

EpoxyPlast 3D B100 UltraPour

EPH3DUPB100
  • up to 10 cm (100 mm)
  • Tables & lamps
  • Self-venting, UV-stabilized (UVA + n-HALS), Diamond clear
  • Low viscosity (1-999 mPa-s)
  • Yes
  • Yes
  • Aromatic
  • 100 : 50 (A + B)
  • EpoxyPlast 3D
  • Solvent-free
  • HDPE canister / bottle
€17.99
EpoxyPlast 3D B100 Ultra Pour | Highest transparency for deep potting up to 10 cm. Product overview: EpoxyPlast 3D B100 Ultra Pour stands for outstanding quality and is a key component of the comprehensive EpoxyPlast 3D epoxy resin system. While it has similar properties to EpoxyPlast 3D B50 Deep Pour, EpoxyPlast 3D B100 Ultra Pour has an extended...
Produktdetails
LuminaCast 1 Fast Set Primer I DIPON.DE LuminaCast 1 Fast Set Primer I DIPON.DE 2
Epoxy resin colorless

LuminaCast 10 Cell Flow

LUC10CLF
  • up to 2 cm (20 mm)
  • Jewelry, pendants, trays
  • Self-venting, UV-stabilized (UVA + n-HALS), Diamond clear
  • Medium viscosity (1000 - 2999 mPa-s)
  • Yes
  • Aromatic
  • 100 : 50 (A + B)
  • LuminaCast
  • Solvent-free
  • HDPE canister / bottle
€16.99
LuminaCast 10 Cell Flow I Medium viscosity perfection Brief description: Immerse yourself in the impressive clarity and brilliance of LuminaCast 10 Cell Flow. With its balanced viscosity, which is almost twice as high as that of LuminaCast 5 Radiant Flow, this highly transparent system sets new standards in terms of quality and application diversity....
Produktdetails
LuminaCast 1 Fast Set Primer I DIPON.DE LuminaCast 1 Fast Set Primer I DIPON.DE 2
Out-of-Stock
Epoxy resin colorless

HoneyResin® ArtWork & Top Coat Epoxy

HNEYRESI
  • up to 0.7 cm (7 mm)
  • Sealing
  • Self-venting, UV-stabilized (UVA + n-HALS), Diamond clear
  • High viscosity (over 2999 mPa-s)
  • Yes
  • Yes
  • Aromatic
  • 100 : 50 (A + B)
  • HoneyResin®
  • Solvent-free
  • HDPE canister / bottle
€28.99
HoneyResin® Professional Artwork & Topcoat Epoxy | High-end epoxy resin for decorative potting and sealing Brief description: HoneyResin® Professional Artwork & Topcoat Epoxy is a high-viscosity premium epoxy resin developed for artistic and decorative applications. It impresses with its high gloss performance, mechanical resistance and excellent...
Produktdetails
LuminaCast 1 Fast Set Primer I DIPON.DE LuminaCast 1 Fast Set Primer I DIPON.DE 2
Epoxy resin colorless

LuminaCast 8 Table Flow

LUC08TACA
  • up to 5 cm (50 mm)
  • Tables & lamps
  • Self-venting, UV-stabilized (UVA + n-HALS), Diamond clear
  • Low viscosity (1-999 mPa-s)
  • Yes
  • Aromatic
  • 100 : 50 (A + B)
  • LuminaCast
  • Solvent-free
  • HDPE canister / bottle
€17.99
LuminaCast 8 Table Flow I Ultra Transparent for high potting up to 5 cm. Brief description: Discover LuminaCast 8 Table Cast. This specially developed product with a low viscosity consistency is predestined for demanding projects such as river tables or other thick-layer potting where u.a. particularly high clarity is required. Excellent UV...
Produktdetails
LuminaCast 1 Fast Set Primer I DIPON.DE LuminaCast 1 Fast Set Primer I DIPON.DE 2
Epoxy resin colorless

EpoxyPlast 3D B20 JewelCast

EPH3DB20
  • up to 2 cm (20 mm)
  • Jewelry, pendants, trays
  • Diamond clear, Self-venting, UV-stabilized (UVA + n-HALS)
  • Low viscosity (1-999 mPa-s)
  • Yes
  • Yes
  • Aromatic
  • 100 : 50 (A + B)
  • EpoxyPlast 3D
  • Solvent-free
  • HDPE canister / bottle
€16.99
EpoxyPlast 3D B20JewelCast I The original from the resin artists Brief description: EpoxyPlast 3D B20 JewelCast is a highly transparent epoxy resin with very good UV stability thanks to the use of UV absorbers and light stabilizers, which is suitable for a very wide range of applications. Particularly suitable for resin art artists, wood...
Produktdetails
Product added to wishlist
Product added to compare.