LuminaCast 3 Crystal Flow (B) I DIPON.DE

LuminaCast 2 Coaster Cast (B) €5.99

LuminaCast 4 Gem Flow (B) €5.99

LuminaCast 3 Crystal Flow (B)

more_vert Liquid

LuminaCast 3 Crystal Flow I Perfection for decorative applications

Brief description:

Experience the exceptional clarity and stability of LuminaCast 3 Crystal Flow, a low viscosity epoxy resin that is perfect for decorative applications, embedding and molding. Thanks to its special formulation, outstanding transparency and UV stability are achieved, which permanently protects your projects from yellowing. Ideal for those who demand the highest quality for their artwork and projects.

Key features:

Clarity at the highest level: enjoy unparalleled transparency that brings out every detail of your projects perfectly.
UV protection: The advanced UV absorbers and HALS additives effectively protect your work from yellowing and harmful UV rays.
Self-deaerating formula: Designed to minimize the formation of bubbles, resulting in flawless finishes.
Low viscosity: Flows effortlessly into even the smallest details and enables precise embedding and shaping.
Part of a comprehensive system: LuminaCast 3 Crystal Flow is an essential component of the LuminaCast epoxy resin system, which is characterized by its outstanding flexibility and application versatility.

Unique selling points:

Sustainable ingredients: contains over 70% bio-based deaerating components derived from renewable sources.
Long-term durability: Specially developed, yellowing-resistant hardener formulas ensure that your projects retain their original brilliance for many years.
Complete in-house production: LuminaCast is developed and manufactured entirely by DIPON in its own factory. This guarantees full control and the highest quality.

LuminaCast 3 Crystal Flow is the ideal solution for highly transparent embeddings and molds. Discover the epoxy resin system that takes your creative projects to a new level.

Further information:

Scope of delivery: LuminaCast 3 Crystal Flow [B] optional [A]

LuminaCast 3 Crystal Flow

Dyn. Viskosität Harz A (23°C):	700 ± 50 mPa*s
Dyn. Viskosität Härter B (23°C):	140 ± 50 mPa*s
Mischungsverhältnis:	2:1 (Harz A + Härter B) nach Gewicht
Verarbeitungszeit (23°C, 200 Gramm, 10mm):*	ca. 35 min. (23°C - 40°C)
tTMax (23°C, 200 Gramm, 20mm):**	ca. 70 min.
Empfohlene Materialtemperatur A+B:	mind. 20°C, empfohlen 23°C
Empfohlene Umgebungstemperatur:	mind. 10°C, empfohlen 15-25°C
Empfohlene Gießhöhe (20°C):	0,1 cm - 1 cm (1 - 10 mm)
Entformbar nach (23°C):*	ca. 16 - 24 Stunden (5-10 mm)
Nächste Schicht gießbar:	ca. 10 - 12 Std. (20°C) (10 mm)
Empf. Mindestmischmenge A+B:	90 Gramm
Schleifbar nach*:	ca. 5-7 Tage, 10 mm, 23°C RT
Härte nach 7 Tagen (23°C):	Shore D82
Wärmeformbeständigkeit:	ca. 68°C

Wichtige Informationen:

Allgemein werden zur Berechnung der Topfzeit standardisierte Werte genutzt. Bei schnellen Systemen wird in der Regel ein Ansatz von 200 Gramm in einem bestimmten Durchmesser und Umgebung in einem HDPE-Becher in adiabater Umgebung gemessen. Die Verarbeitungszeiten verändern sich bei Erhöhung oder Verminderung des Materialfüllstandes sowie der Umgebungs- und Materialtemperatur.

* Die Verarbeitungszeit oder Topfzeit wird als der Zeitraum bezeichnet, wo das vermischte Medium eine Temperatur von 40°C erreicht. Ausgangswerte sind stets 23°C, welche die Laborbedingungen und Messungen in Mitteleuropa widerspiegeln. In Südeuropa und wärmeren Region wird in der Regel ein Wert von 25°C bei Viskosität und Topfzeit (Engl.: "Pot Life" wiedergegeben.

** Die tTMax bezeichnet die Zeitspanne zur Erreichung der maximalen Exotherme (Energiefreisetzung). Die Energie welche bei 2K EP-Systemen freigegeben wird ist deutlich vereinfacht ausgedrückt Wärme. Die Zeitspanne ist in der Regel das doppelte der Verarbeitungszeit.

*** Die Entformbarkeit bei 23 Grad Umgebungstemperatur bei der in Klammern angegeben Gießhöhe. Bei einer geringeren Gießhöhe und gleichbleibender Temperatur verlängert sich die Aushärtungszeit. Bei Zugabe von Färbemitteln kann sich die Verarbeitungszeit verlängern.

**** Die Empfohlene Mindestmischmenge um ein "Ankurbeln" der Reaktion zu erzeugen. Geringere Mischmengen können eine inhomogene Masse zur Folge haben sowie Carbamatbildung begünstigen aufgrund der offenen Standzeit und geringen Wärmeabgabe bei u.a. IPD haltigen Härtern.

***** Der Zeitpunkt ab wann ein Epoxidharz geschliffen werden kann ist abhängig vom Härtegrad. Bei einer zu weichen Oberfläche, in der Regel nach einer zu kurzen Aushärtungszeit, besteht die Gefahr das beim Schleifen durch die eintretende Wärmeentwicklung die Oberfläche nicht gleichmäßig geschliffen wird. Das Risiko einer Beschädigung ist sehr groß, da durchaus die Oberfläche noch Gummiartig resp. klebrig sein kann. Bei Professionellen Anwendern ist ein Shore D Härtemessgerät sehr hilfreich, da hierdurch die Härte gemessen werden kann. Die angegebenen Daten beziehen sich auf eine Gusshöhe (angegeben in mm) sowie die konstante Raumtemperatur (angegeben als Abkürzung RT).

Anwendungsgebiete

Kreieren Sie Schmuck mit Silikonformen, wobei Vergüsse von 1 mm bis 10 mm (20°C) möglich sind.

Fertigen Sie stilvolle Tabletts, Untersetzer und weitere Accessoires.

Erschaffen Sie Glas- und Carbonlaminate sowie andere Formen, bei denen herausragende Klarheit notwendig ist.

Perfekt geeignet für die Erzeugung von Steinteppichen und diversen Mörtelprodukten.

Lebensmittelkontakt: Die Formulierung ist frei von sVHC oder CoRAP Substanzen. Nach vollständiger chemischer Aushärtung kann das Produkt mit Lebensmitteln in Kontakt kommen.

Allgemeine Charakteristik

Besonders vielseitig anwendbar

Niedrigviskos & schnell

Kristallisationsstabile Formulierung

Enthält UV-Absorber und n-Hals Lichtstabilisatoren

Enthält Vergilbungsarme Amine im Härter

Hochtransparente Glasartige Aushärtung

Modernste Entlüfter für Selbstentlüftung

Lebensmittelkontakt: Die Formulierung ist frei von sVHC oder CoRAP Substanzen. Nach vollständiger chemischer Aushärtung kann das Produkt mit Lebensmitteln in Kontakt kommen

LuminaCast System Überblick

Quick Info LuminaCast Epoxy System

PRODUKT	Farbe A+B	*Viskosität (23°C) mPas ± 50**	Max. Gießhöhe (mm) (20°C)	MV* A+B (nach Gewicht)	Anwendungsbereiche	UV-Stabilisierung
LuminaCast 1 Fast Set Primer	Glasklar	Niedrig 120	1-7	2:1	Vorbereitung der Holzgrundierung beim Tischbau (u.a. River Tische), Grundierung für saugfähige und poröse Untergründe	Hervorragend *******
LuminaCast 2 Coaster Cast	Glasklar	Niedrig 290	1-15	2:1	Dekorative hochtransparente Einbettungen und Formen, Resin Art	Hervorragend *******
LuminaCast 3 Crystal Flow	Glasklar	Niedrig 140	1-10	2:1	Dekorative hochtransparente Einbettungen & Formen, Varnish für Canvas, Leinwände	Hervorragend *******
LuminaCast 4 Gem Flow	Glasklar	Niedrig 890	1-20	2:1	Resin Art, Tablets, Coaster, Tischbeschichtungen, Petri-Art	Hervorragend *******
LuminaCast 5 Radiant Flow	Glasklar	Mittel 1330	1-20	2:1	Ähnlich zu LuminaCast 4, 1,5 höhere Viskosität, langsamere Fließeigenschaften für Resin-Art	Hervorragend *******
LuminaCast 6 Art Flow	Glasklar	Hoch 4100	1-20	2:1	Maltechniken, Resin Art, Arbeitsplatten, Versiegelungen	Hervorragend *******
LuminaCast 7 Design Flow	Glasklar	Hoch 5500	1-20	2:1	Ähnlich zu LuminaCast 6, langsamere Fließeigenschaften	Hervorragend *******
LuminaCast 8 Table Flow	Glasklar	Niedrig 75±25	20-50	2:1 / 100:40 **	Für große Dickschichtvergüsse, z.B. für River Tables, Lampenherstellung, größere Castings in einem Guss	Hervorragend *******
LuminaCast 9 Ocean Flow	Glasklar	Niedrig 55±25	30-100	2:1	Für sehr große Dickschichtvergüsse, z.B. für River Tables, Lampenherstellung	Hervorragend *******
LuminaCast 10 Cell Flow	Glasklar	Mittel 2500	1-20	2:1	Ähnlich zu LuminaCast 5, jedoch ca. 2x höhere Viskosität. Ideal für Ocean Technik, Zellenherstellung, Petri-Art, Resin-Kunst	Hervorragend *******

Legende

*	Mischungsverhältnis
**	2:1 (weicher) / 100 : 40 Härter
*******	(UVA + n-Hals in A), Vergilbungsarme Amine in B

Haben Sie Fragen?

Hilfezentrum Support Ticket erstellen

LuminaCast Epoxy System Datenblätter

Datenblätter

PRODUKT	TDB	SDB
LuminaCast Komponente A
LuminaCast 1 Fast Set Primer
LuminaCast 2 Coaster Cast
LuminaCast 3 Crystal Flow
LuminaCast 4 Gem Flow
LuminaCast 5 Radiant Flow
LuminaCast 6 Art Flow
LuminaCast 7 Design Flow
LuminaCast 8 Table Flow
LuminaCast 9 Ocean Flow
LuminaCast 10 Cell Flow

Legende

TDB	Technisches Datenblatt
SDB	Sicherheitsdatenblatt

Haben Sie Fragen?

Hilfezentrum Support Ticket erstellen

LuminaCast 3 Crystal Flow:

General characteristics

Crystallization-stable formulation
Fast curing and low viscosity
Contains UV absorbers and n-neck light stabilizers
Slightly elastic and crack bridging
Ideal for mechanically working workpieces
Particularly high carbamate resistance
Highly transparent glass-like curing
Excellent self-venting properties
Bio-based ingredients in the epoxy resin
Free of CoRAP and sVHC substances
State-of-the-art, particularly low-yellowing base amines and additives
0% VOC content (EU value)
Excellent wetting ability of the substrate
Very low shrinkage (<0.1%)
Compatible with z.B. wood, concrete, glass, metal, glass and carbon fiber mesh, natural stone, quartz sand, marble, granite
Can be used with all DIPON® Alcohol paints, resin pastes & effect pigments

Technical data

Mixing ratio 2:1 (A+B) by weight
Processing time (23°C), 200 grams: approx. 35 min. (23°C- > 40°C)
Recommended material temperature (A+B): 20°- 24°C
Recommended ambient temperature: 20°C - 25°C
Dyn. viscosity (mPa*s) 23°C: A 730 ± 50
Dyn. viscosity (mPa*s) 23°C: B 140 ± 50
Layer thickness (20°C): 1 - 10 mm
Hardness after 7 days (23°C): Shore D81
Heat deflection temperature: approx. 68°C

Fields of application

Create jewelry with silicone molds, with potting from 1 mm to 10 mm (20°C) possible.
Produce stylish trays, coasters and other accessories.
Create glass and carbon laminates and other shapes where outstanding clarity is required.
Perfect for creating stone carpets and various mortar products.
Versatile for casting or laminating, including techniques such as spray lamination, press lamination, infusion, vacuum lamination or traditional hand lamination.
Food contact: The formulation is free of sVHC or CoRAP substances. After complete chemical curing, the product can come into contact with food.

Application

LuminaCast 3 Crystal Flow is accurately weighed by weight in a clean container at a mixing ratio of 2:1. A scale and two mixing cups are required to enable exact weighing and mixing. Never mix by volume, as this can lead to an incorrect result. First mix the A and B components at max. 300 revolutions/minute for approx. three to four minutes. Then pour the A+B mixture into a new clean container and mix again for three to four minutes. Scrape off some of the resin from the edges of the old container and drop it into the center of the new one. This process is important to obtain a mixture that is as homogeneous as possible.

Important notes: Mixing the transport containers (bottles / canisters) A (resin) and B (hardener) will result in incomplete curing and correspondingly incorrect results. The higher the room temperature and the larger the quantity mixed, the faster the temperature development (exothermic reaction).

Important application data:

Working time (pot life) at 23°C (200 grams, 10 mm): approx. 35 min.
tTmax (23°C, 200 grams, 20 mm) (time to maximum exotherm): approx. 70 min.
Mixing time: 3-4 min. + repotting and again 3-4 min. for a mixture that is as homogeneous as possible
Mixing ratio: 2:1 by weight (A+B)
Recommended casting height: (20°C): 0.1 cm - 1.0 cm (1 - 10 mm)
Demoldable after (23°C): (5 - 10 mm) approx. 16 - 24 hrs.
Next layer pourable after: approx. 10 - 12 hours at 20°C (10 mm)
Minimum mixing quantity: Recommended 90 grams (A + B)

What is LuminaCast?

LuminaCast was developed to create an unrivalled clear, UV-stabilized and self-venting system that is easy to handle and covers as many applications as possible, especially in the artistic field. In all formulations, special attention was paid to achieving the highest possible carbamide resistance by using state-of-the-art raw materials and adding hydrophobic additives. Furthermore, in addition to the latest UV absorbers and light stabilizers, only low-yellowing base amines in the hardener and particularly UV-resistant additives have been added to this system. LuminaCast is designed for every application in the decorative sector, whether priming, trays, furniture or large-volume casting. With one resin and ten hardeners, you have maximum flexibility and can give free rein to your creative streak!

The LuminaCast system at a glance:

LuminaCast A component - epoxy resin for all LuminaCast hardeners - (730 mPa*s ± 50, 23°C)
LuminaCast 1 Fast Set Primer (1 mm to 7 mm) - (120 mPa*s ± 50) Low viscosity, pot life, approx. 15 min., can be poured over after 60 - 120 min., ideal as primer / sealer for porous substrates such as z.B. wood
LuminaCast 2 Coaster Cast (1 mm to 15 mm) - (290 mPa*s ± 50) Low viscosity, pot life approx. 40 min. ideal for decorative, highly transparent embeddings and molds
LuminaCast 3 Crystal Flow (1 mm to 10 mm) - (140 mPa*s ± 50) Particularly low viscosity, pot life approx. 35 min. ideal for decorative, highly transparent investments and molds
LuminaCast 4 Gem Flow Flow (1 mm to 20 mm) - (890 mPa*s ± 50) Low viscosity, pot life approx. 55 min. u.a. for resin art with a higher viscosity, comparable to the B20 JewelCast only more viscous
LuminaCast 5 Radiant Flow (1 mm to 20 mm) - (1330 mPa*s ± 50) Medium viscosity, pot life approx. 60 min. u.a. like LuminaCast 4 GemFlow, slightly slower and slower flow properties due to higher viscosity
LuminaCast 6 Art Flow (1 mm to 20 mm) - (4100 mPa*s ± 50) High viscosity, pot life approx. 45 min. for painting techniques, resin art, worktops, sealers, similar to HoneyResin.
LuminaCast 7 Design Flow (1 mm to 20 mm) - (5500 mPa*s ± 50) High viscosity, pot life approx. 50 min. Special flow properties due to setting agent, similar to LuminaCast 6 ArtFlow, feels thinner.
LuminaCast 8 Table Flow (20 mm to 50 mm) - (75 mPa*s ± 50) Low viscosity, pot life approx. 180 min. for large thick-film castings z.B. for river tables, lamp production, larger castings in one pour
LuminaCast 9 Ocean Flow (30 mm to 100 mm) - (55 mPa*s ± 50) Low viscosity, pot life approx. 240 min. for very large thick-film castings z.B. for river tables, lamp production
LuminaCast 10 Cell Flow (1 mm to 20 mm) - (2500 mPa*s ± 50) Medium viscosity, pot life approx. 50 min. for cell effects, Petri Art, floral patterns, resin art, table tops, sealants u.v.m.

Properties: UV-stabilized (UVA + n-HALS), Diamond clear, Self-venting
Viscosity: Low viscosity (1-999 mPa-s)
Calculator: Yes
Info: Yes
Delivery form: Liquid
Pig calculator: Yes
Epoxy resin type: Aromatic
Color palette: Yes
Mixing ratio (A+B): 100 : 50 (A + B)
Epoxy system: LuminaCast
User group: For DIY & resin art, For industry & trade
Container: HDPE canister / bottle

Laden Sie Ihre Fotos hoch

only logged users can upload product photos click here to login

No pictures uploaded

Videos

only logged users can upload videos click here to login

No videos uploaded

LuminaCast 3 Crystal Flow (B) I DIPON.DE 2

Accessories

Pouring spout DIN45 with bellows seal

EPZH-BLGDIN45

Für HDPE-Flaschen bis 1 kg
Black tones
Simple dosing for canisters from 1.5 kg
DIN 45 spout

€0.99

Pouring spout DIN45 with bellows seal HDPE pouring aid for DIN 45 UN chemical canisters which are used at DIPON as canisters in sizes from 2 kilograms and upwards. The pouring aid is a solution for clean and easy dosing of low, medium and high viscosity media. The extendable plastic bellows facilitate precise dosing without soiling the side walls or...

	Pouring spout DIN45 with bellows seal HDPE pouring aid for DIN 45 UN chemical canisters which are used at DIPON as canisters in sizes from 2 kilograms and upwards. The pouring aid is a solution for clean and easy dosing of low, medium and high viscosity media. The extendable plastic bellows facilitate precise dosing without soiling the side walls or opening of the canister. Scope of delivery: HDPE eye spout DIN 45 with bellows cap	Ausgießer Gießhilfe DIN45 mit Balgverschluss €0.99
	DIPON® Epoxy Essentials Spray & Tape Set I Essential products for epoxy DIPON® Epoxy Essentials Spray & Tape Set is a set consisting of the most basic products that no workshop or artist should be without. The set includes the DIPON® Epoxy Anti-Bubble Spray, DIPON® Epox Release Release Agent Spray, DIPON® Surface PreClean Spray and the Mold Release Tape. Save considerably compared to buying them individually. Set contents: DIPON® Epoxy Anti-Bubble Spray 400 ml DIPON® Epox Release Release Agent Spray 400 ml DIPON® Surface PreClean Spray 400 ml DIPON® Mold Release Tape (66m x 5.5 cm, 50my for 3.63m²) Important note: Keep DIPON® Aerosols away from heat and flames. Only use in well ventilated areas. Scope of delivery: Surface PreClean, Epoxy AB corrector, Epox Release release agent Aerosols á 400 ml, mold release tape 66 m x 5.5 cm	DIPON® Epoxy Essentials Spray + Tape SET 3 x Spray á 400 ml €29.99
	Disposable nitrile gloves Disposable nitrile gloves ensure high quality as well as chemical and mechanical resistance with full comfort of use. The gloves are made entirely of nitrile and are powder-free, which makes the transfer of chemical substances more difficult. The nitrile gloves do not cause skin irritation and reduce the risk of food contamination due to the corn starch used in the powder. The polymer nitrile made from plastics is completely free of allergenic proteins. In addition, the material does not react with fats of any origin, making the product suitable for use in the food industry, in petroleum processing and in the manufacture of paints and varnishes. The nitrile gloves contain no latex, silicone, waxes or plasticizers, can be worn on both hands, are non-sterile and odourless. Scope of delivery: 2 nitrile gloves in the selected size	Einweg Nitril Handschuhe (Paar) €0.29
	DIPON® Epox Release Release Agent Spray I Silicone & solvent-free DIPON® Epox Release Release Agent Spray is a silicone and solvent-free release agent on a natural basis for molds made of silicone rubber, epoxy, polyester, acrylic and polyurethane resins. DIPON® Epox Release Release Agent Spray can be combined with PVA Release Agent Spray to increase safety during the release process. The demolding of flat and smooth surfaces, z.B. made of GRP, is uncomplicated thanks to the excellent non-stick effect. The molds and castings can be sanded and polished very well after curing. Properties: Silicone-free Solvent-free Odorless On a natural basis Particularly suitable for epoxy resins Important note: Keep away from sunlight and heat. Scope of delivery: Epox Release release agent aerosol á 400 ml	EpoxRelease Trennmittel Spray I Release Agent Spray €13.99
	DIPON® Epoxy Anti-Bubble Corrector Spray I 100% water-insoluble, 0% alcohol DIPON® Epoxy Anti-Bubble Corrector Spray is the effective high performance solution for removing surface bubbles in epoxy resin projects. The original from DIPON® contains 100% water-insoluble ingredients and promotes a streak-free surface. In contrast to alcohol-based sprays (z.B. Isopropanol I IPA), which are hygroscopic, d.h. water-miscible, the 100% hydrophobic (water-insoluble) DIPON® Epoxy Anti-Bubble Corrector Spray reduces the formation of streaks caused by carmabate salts. DIPON offers a very wide range of effect pigments, making us Europe's market leader in this field. But what are these mica pigments made of? Natural mica pearlescent pigments are composed of the finest natural mica powder, which is carefully coated with a combination of titanium dioxide, iron oxide and other metal oxides. These specially designed pigments are characterized by their homogeneous particle size, outstanding dispersion properties and their resistance to light, acids and alkalis. They also offer no electrical or magnetic conductivity and their chemical stability is impressive. Depending on the coating thickness of the metal oxides, they can produce a wide range of color effects. This makes it possible to imitate natural color tones and create a variety of vibrant decorative effects. Important note: Do not use DIPON® Epoxy Anti-Bubble Spray in closed rooms. Scope of delivery: Spray can 400 ml	Epoxy Anti Blasen Korrektor Spray I Anti-Bubble Spray 400 ml €12.99
	DIPON® mold release tape I Excellent release effect DIPON® Epoxy Release Duct Tape is a mold release tape for epoxy resins. This tape has an excellent release effect and, with the optionally available EpoxRelease release agent spray, is the ideal solution for easily removing potting from an existing formwork. Properties: Tape thickness: approx. 30 my Adhesive thickness: approx. 20 my Length: 66 meters Width: 5.5 cm Area coverage: approx. 3.63 m² (66 m x 0.055 m) Important note: Do not store the form release tape in damp rooms. Scope of delivery: mold release tape á 3.63 m² (66m x 0.055m)	Formentrennband für Epoxidharze €7.99
	Mixing cup 300ml - 1900 ml for varnishes, resins and paints Professional mixing cup for resins, paints and varnishes. The mixing cups are made of robust plastic which is resistant to chemical substances contained in paints. A precise graphic scale on the wall of the bucket makes it easier to dose the correct product quantities while adhering to the manufacturer's specified mixing ratios. The easy-to-read scale on the inside of the bucket makes it easier to dose and mix the right amount of product. You can add 10, 20 or 30 % of the solvent to influence and control the viscosity of the mixture. Innovative method of fusing the scale into the bucket wall ensures its durability in use. Mixing ratio: 2:1, 3:1, 4:1, 5:1, addition of solvent: 10%, 20% and 30% Reusable as epoxy resin can be easily removed from the bucket Stackable With mixing scale 1:1, 2:1, 3:1, 4:1, 5:1 (volumetric) Sizes: 300 ml or 385 grams, 600 ml or 750 grams, 1100 ml or 1400 grams, 1900 ml or 2300 grams	Mischbecher I Mixing Cup 300 ml - 1900 ml €15.98
	Wooden stirring rod / paint stirrer Wooden stirrer with DIPON® lettering for paints, varnishes, resins etc. Can also be used as a can opener for z.B. car paint, liquid rubber and similar. Features: Dimensions: 30.5 x 2.7 x 0.3 cm Material: wood, natural, sturdy, printed in one color with DIPON® crotch pull Scope of delivery: Wooden stirring rod with DIPON® imprint in the desired quantity	Rührstab / Farbrührer €0.49
	DIPON® PreClean Spray I Degreasing spray DIPON® SURFACE PRECLEAN Spray is a one-component solution for the effective, quick removal and cleaning of surfaces with grease, oil, wax, dust and similar soiling. Due to its very fast drying time and efficient composition, DIPON® Surface PreClean Spray is an essential product for every workshop and every artist. APPLICATION: Shake the spray can vigorously for approx. 15-30 seconds before use. DIPON® Surface PreClean Spray is sprayed onto the surface to be cleaned from a distance of approx. 10-15 cm. Repeat the process as often as necessary to remove even the most difficult soiling. Advantages: Removes oil, wax and grease Fast volatilization Anti-bacterial Important note: DIPON® Surface PreClean Spray may only be used in well-ventilated rooms with an appropriate respirator. Scope of delivery: Surface PreClean Aerosol á 400 ml	Surface PreClean Spray / Entfetter Degreaser Spray 400 ml €9.99


PHP_SESSID	dipon24.de	Das PHPSESSID-Cookie ist PHP nativ und ermöglicht es Websites, serialisierte Statusdaten zu speichern. Auf der Website wird es verwendet, um eine Benutzersitzung aufzubauen und Statusdaten durch ein temporäres Cookie zu übergeben, das allgemein als Sitzungscookie bekannt ist. Diese Cookies verbleiben nur auf Ihrem Computer, bis Sie den Browser schließen.	Sitzung
PrestaShop-#	dipon24.de	Es ist ein Cookie, das Prestashop verwendet, um Informationen zu speichern und die itzung des Benutzers offen zu halten. Ermöglicht das Speichern von Informationen wie Währung, Sprache, Kundenkennung und anderen Daten, die für das ordnungsgemäße Funktionieren des Shops erforderlich sind.	480 stunden

LuminaCast 3 Crystal Flow (B)

Brief description:

Key features:

Unique selling points:

Further information:

LuminaCast 3 Crystal Flow

Wichtige Informationen:

Anwendungsgebiete

Allgemeine Charakteristik

LuminaCast System Überblick

Quick Info LuminaCast Epoxy System

Haben Sie Fragen?

LuminaCast Epoxy System Datenblätter

Datenblätter

Haben Sie Fragen?

Produktkonfigurator

+ Lumina Cast (A) Epoxidharz (optional)

Brief description:

Key features:

Unique selling points:

Further information:

+ Optionales Zubehör

Set contents:

Properties:

Properties:

Features:

Advantages:

Kennzeichnung gemäß CLP/GHS-Verordnung

Sicherheitshinweise LuminaCast 3 Crystal Flow (B)

Mengenrabatte

LuminaCast 3 Crystal Flow:

Application

Important application data:

What is LuminaCast?

The LuminaCast system at a glance:

Laden Sie Ihre Fotos hoch

Videos

You might also like

Customers who bought this product also bought:

16 other products in the same category:

Lumina Cast (A) Epoxidharz (optional)

Optionales Zubehör